PRS SE Bernie Marsden Wiring Harness CTS 525k Potentiometers .022uF PIO Capacitor Switchcraft Jack

$82.95
Availability:
5 Day Build and Test Time

Jackson Electronic  Luthier ®

525k ohm Ω SHORT Shaft

PIO NOS Capacitor

 

NOS Vitamin Q Spec Caps (PIO) capacitor - .022uf/200v. The conductor is made of aluminum foil and the dielectric is oil saturated paper, glass Hermetically sealed in a metal body. These capacitors have Superior Tonal Resonance.
 
Potentiometer are CTS 525k Custom Pots
Neck Volume
Bridge Volume
Master Tone
 
Jack is a Switchcraft J11
All Spaghetti Tubing is Grade A.

Build is a 5% Tolerance Build which produces a better tone than a 10% build tolerance.


Many Builds are 10% Tolerance and some are even 20% Tolerance
CTS 525K Potentiometers and Capacitors, as well as all materials used, Come With Complete Test Reports and Specifications.
Vintage Upgrade Kit offers a transparent, dynamic sound for anyone who are tired of not being able to use the controls on your guitar effectively. This Harness is for those who are tired of losing tone and note-definition every those time they roll their control past 8!! Th harness is designed for all PRS® style guitars. Most set-neck versions of these guitar use the 90 degree switch; bolt-on versions use the short/straight switch. NOTE: The short/straight switch will work for all model guitars, so if you have doubts as to what is in your guitar, go with the short/straight option. We do alternate caps and with or without the treble bleed.

Please Note: With any PRS® SE models other than the McCarty or McCarty wired guitars you will have to enlarge the rotary switch hole to 1/2" for the toggle switch to fit. Also be aware that some knowledge of basic wiring is needed as PRS® does not use the same color codes as other Makers.

PLEASE NOTE: All guitars manufactured in Korea, Japan, China, Indonesia and Mexico use metric pots (6mm), and have metric sized holes drilled for the pots. All pots sold by Jackson Electronic Luthier uses American Standard pots and hole diameters (3/8"). Therefore, holes in the guitar, plates and/or pickguards will need to be enlarged to 3/8" to fit properly. Also, metric knobs will not fit the pot shafts; most popular knobs are available online. Please message us for details or questions about installation.
Please Note: