PRS II Type Wiring Harness by JEL With Treble Bleed and NOS Sprague 715P .022 uF Orange Drops

10 Day Build and Test Time unless stated otherwise

Jackson Electronic  Luthier ®

525k ohm Ω SHORT Shaft

715P NOS Capacitor


All Materials assembled as Vintage Wiring.

Wired with 20 AWG Bus Wire

Historically Correct Gibson Yellow Insulation

Comes with Instructions

Build is a 5% Tolerance Build which produces a better tone than a 10% build tolerance.

Many Builds are 10% Tolerance and some are even 20% Tolerance
CTS 525K Pro Potentiometers and Orange Drop Capacitors, as well as all materials used, Come With Complete Test Reports and Specifications.

Includes Switchcraft 3-Way Switch and Jack with .022 uF 715P Orange Drops and treble bleed. Gavitt Wired with PVC Insulation and Spaghetti Tubing Insulation.

Vintage Upgrade Kit offers a transparent, dynamic sound for anyone who are tired of not being able to use the controls on your guitar effectively. This Harness is for those who are tired of losing tone and note-definition every those time they roll their control past 8!! Th harness is designed for all PRS® style guitars. Most set-neck versions of these guitar use the 90 degree switch; bolt-on versions use the short/straight switch. NOTE: The short/straight switch will work for all model guitars, so if you have doubts as to what is in your guitar, go with the short/straight option. We do alternate caps and with or without the treble bleed.

Please Note: With any PRS® model other than the McCarty or McCarty wired guitars you will have to enlarge the rotary switch hole to 1/2" for the toggle switch to fit. Also be aware that some knowledge of basic wiring is needed as PRS® does not use the same color codes on rotary guitars as used on the McCarty.

PLEASE NOTE: All guitars manufactured in Korea, Japan, China, Indonesia and Mexico use metric pots (6mm), and have metric sized holes drilled for the pots. All pots sold by Jackson Electronic Luthier uses American Standard pots and hole diameters (3/8"). Therefore, holes in the guitar, plates and/or pickguards will need to be enlarged to 3/8" to fit properly. Also, metric knobs will not fit the pot shafts; most popular knobs are available online. Please message us for details or questions about installation.
div class="yotpo bottomLine" data-yotpo-product-id="136">
Please Note: